10mm galvanized lifting chain hoisting 24m drying oven

The transportation of industrial boilers requires hoisting and placing the equipment on trucks. Chain slings can be used in conjunction with overhead cranes to complete loading. Select the appropriate spreader and lifting point according to the tonnage and size of the equipment, and start the operation after the test lifting is correct. Use 10mm diameter chain rigging to carry cargo within 4 tons to avoid edges and corners directly bearing on the chain, and to protect the rigging with padding. It is easy to hoist in the workshop, but large-scale industrial filter installation outdoors requires a crane and rigging.

The transportation of industrial boilers requires the equipment to be hoisted and placed on trucks. For example, the hoisting of a 24-meter chain belt drying furnace can be carried out using chain slings and combined with the overhead crane in the workshop to complete the loading. According to the tonnage and size of the equipment, we choose 4 pieces of 10mm galvanized chains to form a complete set of rigging for lifting.

It needs to be hooked with a suitable hook to the corresponding hooking position at the bottom of the boiler, or to the corresponding lifting point above, to confirm that the installation is firm and the lifting is stable. If there are no reserved lifting points, you can use two chains and put them under the boiler, because there are legs below to fix the equipment. After the trial lifting is OK, you can start the operation. Use the remote control to control the overhead crane and electric hoist to move to the truck for pre-loading. position to keep the running and lifting speeds even and avoid collisions.

A chain rigging with a diameter of 10mm can carry cargo within 4 tons. If the lifting angle of the rigging is different, the actual load-bearing load needs to be comprehensively considered. For methods, please refer to: Load-bearing Calculation of Double-limb Chain Rigging. Avoid contact with the hanging object to avoid the edges and corners directly bearing on the chain, which may easily damage the chain link or cause deformation. You can add some wooden spacers or corner sheaths and other protective rigging. It is also more convenient to hoist in the workshop, with a crane. For some large-scale industrial filtration installations outdoors, including the initial assembly of the furnace steel structure, a crane is required to match the rigging.