What should I do if the wire rope electric hoist is prone to power outage

The installation and use of monorail cranes installed on various overhead cranes, such as the more commonly used single-speed wire rope electric hoists, should follow the correct requirements. Of course, if you install it yourself and do not have much experience, there may be some problems. An oversight in details. For example, if the wire rope is found to be deviating during the hoisting process, it is easy to lose power.

If a power outage occurs while lifting heavy objects, it will be more troublesome, because the motor cannot be powered normally and cannot be raised or lowered. The heavy objects need to be manually removed first and then repaired. The main reason is that some problems may not be discovered in time during the lifting test. So it leads to this situation. The fault can be found from the deviation of the wire rope and power outage. It should be that the installation position of the monorail electric hoist is not level and firm enough, which will easily cause the rope to deviate from the normal position, thereby pulling the limiter and causing the limiter to malfunction. The action triggers a power outage.

The same is true for mini electric hoists for household cranes. Although it is simpler to install and relies on screws and nuts to be fixed on steel beams or square tubes, if the installation is not tight or stable enough, problems will also occur during hoisting. . Although the steel wire rope is not as strong as the electric chain hoist and is not easy to wear, it is more economical and can be used in some light and small lifting operations with ease. In short, choose a crane based on your own needs.