News

The installation and use of monorail hoists installed on various overhead cranes, such as the more commonly used single-speed wire rope electric hoists, should follow the correct requirements. Of course, if you install it yourself without much experience, you ...

The binding belt is a common tool for fixing goods. During the use, some users reported that the tie-down device broke, causing accidents. Do you know what causes the binding belt to break? Improper use of the ratchet tie-down device can also cause the bind...

Chain lever hoists have different specifications and models for different users to choose from, including 250 kg lever hoists and 500 kg lever hoists. Do you know the difference between the two? From the perspective of load-bearing capacity, the weights of ...

Chain electric hoists are common in industrial production. After some users purchased electric hoists, they found that the reducer of the 10-ton electric hoist was damaged. What is the reason? Let's take a closer look: The reason why the reducer of the chai...

1. Calculation method of chain hoist chain length The chain length of a chain hoist generally refers to half of the sprocket diameter. Common chain length specifications are 0.25 inches, 0.375 inches, 0.5 inches, 0.625 inches, 0.75 inches, 1 inch, etc. For ...

1. Causes of rust on hoist chainThe hoist chain is used for a long time and is easily affected by the indoor and outdoor climate, humidity, chemicals, etc., which leads to rust on the chain surface. Rust will reduce the smoothness of the chain surface, thus af...

Chain hand chain hoists need regular maintenance and care, which can not only avoid many problems during use, but also extend the service life and reduce the cost of replacement and repair. During maintenance, some positions inside the hoist need to be lubrica...

Machine modification: (1) For the phenomenon of top punching, the electric hoist can be dismantled and overhauled, and the damaged parts can be replaced and then tested.(2) For the shaking phenomenon, the trolley clearance needs to be reinstalled and adjusted...

When the electric hoist runs left and right, the clearance between the wheel flanges at both ends of the track meets the requirements normally, but the clearance between the wheel flanges is obviously too large when it runs to the middle section. After careful...

‌The missing safety buckle of the hand chain hoist will bring serious safety hazards. ‌ The hand chain hoist is a common lifting equipment used to lift and move heavy objects. The safety buckle, also known as the safety tongue, is an important saf...